Phone Icon

FAQ graphic with Motrac logo

FAQ – Motrac Hydraulics

Find out how efficiently and precisely hydraulics are responsible for controlling and regulating various applications. Here we try to comprehensively answer your frequently asked questions.

Fundamentals of hydraulic engineering

What is a hydraulic control block?

A hydraulic control block is a component made of aluminum, steel, or cast iron, in which several hydraulic valves are combined into a compact functional assembly. Internal bores and channels connect the individual valves together, thus replacing much of the external piping otherwise required. Control blocks perform three functions: they distribute the volume flow from the pump to the actuators, control the direction of movement, and regulate pressures and volume flows. Compared to individually routed valves, they save on installation space, reduce leakage points, and simplify assembly and maintenance. They are used in virtually every industrial sector — from construction machinery to machine tools to marine technology.

The hydraulic drive technology enables the generation of mechanical movements in machines and systems. It is a technology that involves the generation, control, and transmission of force and motion through fluid pressure.

In a hydraulic drive system, the hydraulic fluid is pressurized using a pump. This pressure is then transmitted through pipes and hoses to hydraulic cylinders or hydraulic motors. The pressure in the fluid causes the cylinders to move in and out or the hydraulic motors to rotate. This movement is used to drive machines and mechanisms in various applications, from heavy construction machinery to industrial presses and conveyor systems.

The hydraulic power transmission is known for its high power-to-density ratio, meaning that it can exert a large force in relatively compact systems. It is often used in situations where high forces or precise control of movement are required.

Screw-in valves (Cartridge valves) are screwed directly into a threaded hole in the control block. They offer the highest functional density per installation space and are ideal when many valves need to be integrated into a tight space. CETOP construction valves According to ISO 4401, a standardized hole pattern is screwed onto the block surface. Its advantage lies in its manufacturer-independent design — a CETOP-NG10 directional valve from manufacturer A fits onto the block designed for manufacturer B. In practice, both types of construction are often combined on a single block: threaded valves in the base body, CETOP directional valves on the structural surfaces.

The nominal size (NG) refers to the standardized diameter of the main bore of a hydraulic valve and thus indirectly to the maximum sensible volume flow. NG06 suitable for volume flows up to approx. 60 l/min, NG10 up to approx. 150 l/min, NG16 up to approx. 300 l/min, NG25 up to approx. 500 l/min and NG32 Furthermore, the hole patterns are defined in the ISO 4401 standard (or the previous CETOP standard). The correct choice of nominal size depends not only on the volumetric flow rate, but also on the acceptable pressure drop and the required flow dynamics — a valve that is underdimensioned leads to energy losses, while one that is oversized is unnecessarily large and expensive.

A lowering brake hydraulic valve is a pressure-dependent hydraulic valve that safely holds suspended or pulling loads and allows for controlled lowering. The valve prevents the return flow from the hydraulic cylinder as long as no active control pressure is applied from the inlet side. This ensures an uncontrolled lowering of the load in the event of a hose rupture or a pump standstill. Typical applications include lifting jacks, crane outriggers, support cylinders on construction machinery, forestry machines, and lifting platforms. IMAV Hydraulics offers lowering brake hydraulic valves in intermediate plate construction for A-, B-, or A+B-action in aluminum and steel with various pressure levels.

The material selection primarily depends on operating pressure and weight requirements. Aluminum tax blocks They are designed for pressures of up to about 250 bar and weigh about one-third of a comparable steel block — they are the first choice in mobile hydraulics where weight plays a role (construction machinery, agricultural and forestry machinery, forklifts). Steel tax blocks are approved for operating pressures up to 420 bar and above and are used where high pressures, load changes or impact loads occur — classic applications include presses, stationary industrial equipment, marine technology and heavy lifting equipment. For high serial quantities with complex geometries, casting is also an option.

Mobile hydraulics Refers to hydraulic systems in mobile work machines — excavators, wheel loaders, tractors, harvesters, forklifts, forestry machines. It is characterized by compact design, weight optimization, robust environmental conditions (dust, temperature, vibration), and typical operating pressures up to 350 bar. Industrial hydraulics or stationary hydraulics are used in fixed installations — presses, machine tools, test benches, and rolling equipment. They allow higher pressures of up to 700 bar, usually operate with larger volume flows and rely more on servo and proportional technology. Motrac Hydraulik develops system solutions for both areas, with a focus in the mid-performance segment.

The pressure control in a hydraulic system is a complex process that, to ensure optimal performance and safety, requires a combination of components and techniques.

One of the most important components in this process is the pressure limiting valve. This valve serves as a safety measure by limiting the maximum pressure in the system. When the pressure reaches this value, the valve opens and allows the hydraulic fluid to escape. This prevents damage to components and equipment that can be caused by excessively high pressure.

Another important element is the pressure control valve, which allows the desired pressure in the system to be adjusted. This valve maintains a constant pressure regardless of load fluctuations or other conditions. This allows the system to operate consistently and precisely according to the requirements of the application.

In modern hydraulic systems, more advanced technologies such as variable-speed drives (inverters) can also be used. These controls allow the operator to adjust the speed of the hydraulic pump. This not only allows precise control of the speed of the movements but also of the pressure in the system.

In short, the pressure control in a hydraulic system is a combination of various components and techniques to ensure safe, uniform, and efficient operation.

Open and closed hydraulic systems are two different approaches to the design of hydraulic systems, each with their own characteristics and applications.

An open hydraulic system is a system in which the hydraulic fluid is returned to a container or tank after use. The fluid is not reused after use but is discharged and possibly filtered before being returned to the container. Open hydraulic systems are often used when multiple hydraulic functions must operate in parallel or for cylinder functions.

In a closed hydraulic system, the hydraulic fluid continues to circulate in a closed loop. With this method, only a small portion of the fluid needs to be filtered and purified before it returns to the system. This type of system is significantly more efficient than an open system, as the pressure drop is minimal due to the use of fewer components. Closed systems are ideal for rotating applications where high efficiency, accuracy, and precision are required.

The most common types of hydraulic pumps are axial piston pumps, gear pump and vane pump

Monday control blocks, abbreviated as MS blocks, are hydraulic control blocks from the brand IMAV. MS blocks are individually designed and manufactured for a customer application. Monday control blocks from the brand IMAV offer 100% customer protection and are sustainably and virtually unlimitedly available. MS blocks can be manufactured from aluminum and steel and are available with complete valve technology as well as without it. MS blocks from the IMAV brand are 100% tested.

Assembly component groups, or MB units, are individual customer solutions. MB units can be composed of a combination of IMAV standard housings as well as multiple MS blocks. Together with integrated hydraulic valves, they offer a special function for operating hydraulic systems and systems.

Selection and decision

How do I choose the right directional valve for my application?

The selection of a directional valve follows four main criteria. First, the switching position — 2/2-, 3/2-, 4/2- or 4/3-way valve, depending on how many connections and switching positions are required. Secondly, the nominal size after the maximum volume flow (see question 3). Thirdly, the method of operation — electromagnetically, hydraulically controlled, manually, pneumatically or proportionally — depending on the required control accuracy and switching dynamics. Fourthly, the slide form, These determine the behavior in mid-position (closed, circulating, swimming position). For complex applications, we recommend designing them together with our technical sales team — often this leads to optimization potential that is overlooked when choosing from a catalog alone.

A pure Throttle valve reduces the volume flow in both directions of flow equally. One Throttle check valve The throttling is only in one direction, while the opposite direction is completely open. The decision depends on the desired behavior: If a cylinder is to operate with reduced speed both when moving out and when moving in, choose a bidirectional throttle valve. If only one direction of movement (typically lowering a load) is to be throttled, while the opposite movement can be performed quickly, the throttle-reversal valve is the right choice. In practice, the throttle-reversal valve dominates — lowering brake applications are significantly more common than bidirectional throttling.

A custom-made control block can be worth combining with up to 2 valves, at least if space, weight, leakage freedom, or service friendliness are critical project requirements. Beyond the pure cost of the individual components, the integrated block offers significant advantages: less assembly effort, reduced leakage risk, defined flow conditions, reduced documentation complexity. With serial production quantities, the one-time development costs quickly amortize; but we also manufacture economically in the case of individual and small-series production. Our technical team typically provides an indicative cost estimate within a few working days after receiving the requirement specification.

Yes. The IMAV screw-in valves follow the industry-standard, standardized hole patterns and screw-in bores and are therefore interchangeable with valves from other reputable manufacturers. CETOP construction valves according to ISO 4401 fit on all standard-compliant surfaces. In practice, however, setting and characteristic curve characteristics differ between manufacturers, which is why we recommend a case-by-case adjustment in functionally critical replacement projects. Our technical sales department supports compatibility tests and provides comparison data sheets for third-party products upon request.

By default, NBR seals (Nitrile rubber) used — suitable for mineral oil hydraulic fluids and temperatures of approx. -30 °C to +100 °C. For elevated temperatures, aggressive media or highly flammable hydraulic fluids (HFC, HFD), use FKM (Viton) For use, approved for temperatures up to +200 °C. In special applications involving water, steam or aqueous solutions, it is recommended to use a EPDM Used — however, this combination is incompatible with mineral oil. The seal selection should always be made in parallel with the choice of hydraulic fluid; improper seal materials are one of the most common causes of premature valve failure.

The surface treatment depends on the material and the application environment. Aluminum tax blocks is Eloxation the standard — black or colored, with good corrosion resistance and high surface hardness. For increased corrosion requirements, Hart­eloxal in question. In Steel tax blocks is Plating The classic cost-effective variant for general mechanical engineering. For corrosion-critical environments (maritime technology, outdoor installations, winter service) we recommend Zinc-nickel coating or Powder coating. Food or pharmaceutical applications usually require Stainless steel without additional coating. For each project, we customize the surface based on the specific application requirements.

Companies and processes

At what quantity does Motrac Hydraulik manufacture custom-made solutions?

We are producing now Quantity 1. Our focus is on projects with production volumes between 1 and 2,000 units per year — the medium segment in which we can optimally leverage our strengths in design expertise, flexible CNC manufacturing, and test bench capacity. Both the individual prototype for a special machine and the ongoing serial production for OEM customers are part of our daily business. For very large quantities (> 10,000 units per year) or for highly specialized mass applications, we tailor the best manufacturing strategy for the individual case — possibly in combination with casting or with partners in our network.

A project begins with the Requesting admission — hydraulic schematic diagram, installation space, connection diagrams, quantities, documentation requirements, load sheet. Based on this, the Design in 3D CAD, usually including flow simulation of the channel geometry. After customer approval, the Production on our 5-axis CNC machining centers, followed by deburring, high-pressure cleaning, and, depending on the specification, surface treatment. Subsequently, Mounting of the valves to customer specifications and Final inspection on our testing bench (tightness, function, pressure testing). It is delivered ready for installation with complete documentation (circuit diagram, manufacturing drawing, bill of materials, test report). The lead time depends on complexity and the status of the order and is agreed upon specifically at the beginning of the project.

Each customer-specific tax block goes through a Final testing on our testing stand — Leakage testing with test pressure, functional testing of all switching states, pressure testing according to specification. Standard documentation includes the hydraulic schematic diagram, the manufacturing drawing, the item list of the installed components and the test report. Upon request, we additionally provide material certificates according to EN 10204 (2.1, 2.2 or 3.1), traceability documentation, declarations of conformity or project-specific documentation according to customer specifications. In safety-critical applications (Machine Directive 2006/42/EG), we support the integration of the hydraulic components into the overall safety concept.

Motrac Hydraulik has been an official distributor for LHY Powertrain since 1959, formerly Linde Hydraulics, and is one of the established partners for this brand in Europe. The product range includes Linde adjustment and control pumps the series HPV and HPR and CPV for closed and open circuits, LHY Powertrain, formerly Linde Hydraulics of the series HMF, HMV, HMR CMF and CMV (constant, adjustable and regulating motors) as well as complete Hydrostatic drive and operating systems. The products are primarily used in construction machinery, municipal vehicles, agricultural and forestry machinery, lifting equipment and marine applications. Additionally, we offer spare parts, repair and maintenance services for Linde components as well as complete engineering services for hydrostatic system solutions.

Yes. Our service area includes Repair and maintenance of hydraulic pumps and motors (especially Linde and Danfoss, but also other manufacturers), Repair of hydraulic cylinders including sealing replacement and piston rod repair, as well as Overhaul of control blocks and valve assemblies. For older or no longer available components, we provide Spare parts and replicas According to customer specifications or existing documentation. Our test bench capacity allows for the final functional testing of repaired units under realistic load conditions. For ongoing systems, we also offer preventive maintenance inspections on-site when required.